About Us

Private company “ROMAN”, specializing in the manufacture of various wooden products, offers euro windows and doors made of three-layer timber, as well as doors made of single-layer timber. Wholesale and retail products. We are engaged in the production of spliced ​​casings, plinths to the floor and to the paneling, the spliced ​​paneling, the floor board, and more. We have been working in the carpentry market for 18 years. Our suppliers, the best of the best and therefore every one of our doors, windows, we have installed, fully meet the declared quality level. For production we use local breeds: pine, spruce, oak. The geography of our supplier partners is quite extensive. Interior doors, windows, are made of high quality components of domestic and imported production. Wooden doors are made using modern technology, which eliminates their delamination or drying. The products we offer have a stylish design and will decorate any room. Entrance, interior doors and windows are provided with reliable construction and high quality of components. Our products are the result of careful engineering that guarantees the safety and comfort of your home.

PRODUCTION PROCESS

MANUFACTURED

01

Drying of wood

Before entering the production of wood undergoes hydrothermal treatment. This minimizes internal stresses and prevents cracking during processing. When the humidity reaches 8%, the wood is indoors for the sake of humidity.

02

Sawing on slats

Upon completion of the hydrothermal treatment, the wood (board) is "loosened" on lamellae of the desired sizes, which are processed and distinguished by segments of a given length

03

Troubleshooting

The natural disadvantages of wood are eliminated: knots, tar pockets, etc.

04

Thorn cutting

Thorns are cut on both sides to merge the bars into a solid lamella

05

Drying of wood

Before entering the production of wood undergoes hydrothermal treatment. This minimizes internal stresses and prevents cracking during processing. When the humidity reaches 8%, the wood is indoors for the sake of humidity.

06

Sawing on slats

Upon completion of the hydrothermal treatment, the wood (board) is "loosened" on lamellae of the desired sizes, which are processed and distinguished by segments of a given length

07

Troubleshooting

The natural disadvantages of wood are eliminated: knots, tar pockets, etc.

08

Thorn cutting

Thorns are cut on both sides to merge the bars into a solid lamella

09

Fusion

The resulting bars on the automatic line are combined and glued into a solid lamella which is further obstructed

10

Bonding lamellas in three-layer beam

To do this, the lamella is applied glue of the highest water resistance category D4 and they are placed in a special press where under pressure for a fixed time there is bonding

11

Three-layer beam

A three-layer timber is considered to be properly constructed if the annular rings of adjacent lamellae are in the opposite direction. It is brought under the control of specialists.

12

Product collection

One of the most responsible stages. It is carried out under the strict supervision of specialists.

13

Bar trim

From the prepared bar make window profiles. Software-controlled equipment is used to form complex sections. Non-standard windows need an individual approach. Then manual labor is applied.

14

Fine processing of the product

The wooden product requires careful and careful attitude. Only the best specialists carry out fine grinding, puttying, preparation for painting.

15

Soaking the primer and painting

Impregnation priming and painting protect the window from moisture, fungi, retain the appearance. We use paint coatings of a wide range of colors, on a wet basis, by the leading firms "ROTTO" and "Sigenija" (Germany), varnishes and primers - firms "Vernikolor" and "ILVA" (Italy).

16

Installation of accessories and seals

After painting the product is fitted with accessories. Double circuit seals keep elasticity at temperatures from -65 to +85 degrees and provide 100% tightness

17

Installation of double-glazed windows

One- and two-chamber double-glazed windows are used, which are sealed with silicone. It is possible to install tinted, mirrored, armored glass, as well as installing stained glass windows inside the window.

18

Installation of shutters on a frame

For preliminary adjustment of work of accessories the ready shutters are mounted on a frame. Final adjustment is made when the window is mounted on the object.

OUR WORKS

BEST